Custom Welding & Repair in Nappanee, IN
Steel, aluminum, or cast iron. Big job or small. We'll weld it right.
Something broke, or you need something built. Bring it to Hochstetler Welding. We do custom welding and repair in steel, aluminum, and cast iron for customers across Kosciusko and Elkhart County.
"We Don't Do That" Is the Last Thing You Want to Hear
You call one shop. They don't do aluminum. The next one says cast iron can't be fixed. A third one is booked out for weeks.
Meanwhile, your part sits broken. It might be a gate hinge, a trailer ramp, a dock bracket, or a tractor part nobody makes anymore.
We get it. That's why we work with more than one kind of metal, all under one roof.
What We Weld
Three Kinds of Welding Work, One Shop
Custom Welding & General Repair
Need a part made from scratch? Or a broken piece welded back together? That's our everyday work.
We build one-of-a-kind pieces to fit your needs. We also fix worn and broken metal parts. From a garden tool to a semi-truck repair, no job is too small.
Broken brackets, hinges, and mounts
Custom racks and tool mounts for trucks and trailers
Replacement parts that are no longer made
Decorative pieces built to your design
Household, farm, and shop repairs

Aluminum Welding & Repair
Aluminum is light and doesn't rust. But it takes a different touch than steel, and many shops won't work with it. We will.
We repair aluminum for lake owners, trailer owners, and truck owners across Kosciusko County's lake country.
Dock and boat lift brackets
Pontoon rails and ladders
Aluminum trailers and ramps
Truck toolboxes
Lake season is short. A cracked bracket in July can cost you weeks on the water. Call early, and we'll give you a straight answer.

Cast Iron Repair
Cast iron cracks in its own way. It needs a careful repair, and many shops won't even try. Before you give up on an old part, let us take a look.
Antique tractor and engine parts
Wood stove parts
Cast iron kettles and family heirlooms
Old farm pieces that can't be replaced
We'll be honest with you. Some cast iron can be saved, and some can't. Either way, we'll tell you straight.

Stainless Steel Welding & Repair
Stainless steel holds up to water, washdowns, and weather without rusting. When it cracks, it needs a careful weld to stay clean and strong.
Barn and livestock equipment parts
Feed and wash system parts
Kitchen and shop equipment
Stainless rails, brackets, and trim
Callout: Not sure if your part is stainless or regular steel? Bring it in, and we’ll tell you.

Chromoly Welding & Repair
Chromoly is strong and light. It’s used in race cars, pulling rigs, and off-road builds. A bent or cracked tube needs the right weld to stay strong.
Dirt-track race car frames and tubes
Tractor and truck pulling parts
Off-road build parts
Bent or cracked chromoly tubing
Callout: Race day or a pull coming up? Call early so your part is ready in time.
Trusted Local Welding Shop
One Welding Shop for Steel, Aluminum, and Cast Iron
Hochstetler Welding has served Nappanee since 2001. Our 6,512-square-foot shop gives us room for small parts and big jobs.
We look at your part, tell you what we think, and weld it to last. There's no sales pitch, just good work.
We're a family-owned shop. Our name is on every job, so we do it right the first time.

Why Hochstetler
Why Folks Bring Their Welding Work to Us
Many metals, one stop. Steel, aluminum, stainless, chromoly, and cast iron. You don't need to drive to three shops.
Honest answers. We'll tell you if it's worth fixing, or if replacing it makes more sense.
Built to last. We weld it strong so you don't have to fix it again next season.
No job too small. A single bracket gets the same care as a big repair.
Trusted locally. BBB Accredited with an A+ rating since 2009, and a Business Rate Best of 2026 award.
Close to home. We're an easy drive from Milford, Syracuse, Wakarusa, Bremen, and Warsaw.
Did Your Last Weld Crack Again?
Maybe you welded it yourself in the shop or pole barn. Maybe another welder fixed it. Either way, it cracked again, right next to the old weld.
Now you're not sure who to trust. And some metals, like aluminum and cast iron, need a different touch than steel.
Bring it in. We'll look at why it broke and tell you what a proper repair takes.
We handle jobs big and small — for farms, businesses, and homeowners across Kosciusko and Elkhart County.
Simple, Straightforward Workflow
How Our Custom Welding and Repair Works
Clear Answers
Frequently Asked Questions
Do you take custom welding jobs?
Yes. We build one-of-a-kind metal pieces to fit what you need, whether it's a working part or something decorative.
Can you weld aluminum?
Yes. We repair aluminum docks, lift brackets, pontoon rails, trailers, ramps, and toolboxes.
Can cast iron be welded?
Often, yes. It depends on the crack and the part. Bring it in, and we'll give you an honest answer.
What metals do you work with?
We work with steel, aluminum, stainless steel, chromoly, and cast iron. If you have another metal in mind, give us a call.
Do you take small jobs?
Yes. From a garden tool to a semi-truck repair, no job is too small.
Can you make a part that isn't made anymore?
In many cases, yes. Bring the old part, a sketch, or measurements, and we'll see what we can do.
Can you work from a sketch or a photo?
Yes. A rough sketch, a photo, or a good description is enough to get started on most custom jobs.
Do you fix dock and boat lift parts?
Yes. Bring the broken bracket or part to our shop, and we'll repair it.
How much will my repair cost?
Every job is different. We look at your part first, then tell you what it needs.
What are your hours?
We're open Monday through Friday, 7:00 AM to 2:00 PM.
How do I pay?
We accept cash and personal checks.
Where is your shop?
We're at 7262 W 1350 N in Nappanee, IN. We serve Kosciusko County, Elkhart County, and nearby towns.
Get Your Trailer Back on the Road
Call Hochstetler Welding today. We'll take a look, give you a straight answer, and fix it so it holds.


